USER MANUAL
–
Portman Custom Lights P3 PIXEL
Installation
Before mounting the fixture read and follow the safety recommendations indicated in the Safety
Information.
The Portman P3 PIX3L may be installed on a tripod, on a clamp or on Portman Spinner structure. The
fixture has 13 mm (0,512 in) hole for a spigot, rigging clamp or a screw. Before rigging operations make
sure, that the structure onto which you are mounting the fixtures can withstand the weight of all of the
fixtures. Check if there is enough room for ventilation, configuration and maintenance in a location
where you want to place the fixture. You must secure every hanged fixture with appropriate safety wire.
To adjust the position of the fixture when aiming it to the desired angle, use the side handles. Loosen
them by turning them counterclockwise before adjustment and set the desired angle. Tighten the
handles after adjusting the position by turning them clockwise. Operate handles carefully and manually
only. Tools can damage them.
You can easily change the orientation of tightened handles to make your rig looks even better. Gently
pull the tightened handle to disengage its teeth and rotate it into the desired orientation. By releasing
the handle the return spring automatically engages the teeth.
