4
(2) Activate or deactivate Immediate Geo-fence
Press the button and release it when the LED flashes once. After releasing it, the LED will
stay continuously on to indicate the ‘Immediate Geo-fence’ is on. To deactivate: Press the
button (the LED will be temporally off), and release it when the LED flashes once. After
releasing it, the LED will then stay continuously off. A report will be sent out if the vehicle
goes out/in to the Geo-fence zone.
(3) ‘Duty on’ or ‘Duty off’ reports / ‘Status on’ Status off’ reports
Press the button (the LED will be temporally stay off) and release it when the LED flashes
3 times. After releasing it, a ‘Duty on’ report will be sent out. To deactivate: Press the
button (the LED will be temporally stay off) and release it when the LED flashes 3 times.
After releasing it, a ‘Duty off’ report will be sent out.
(4) Emergency release to exit ‘ARM’, modes.
Ignition ON, press and hold the button (the LED will be temporally stay off) and release it
when the LED flashes 5 times. After releasing it, ‘ARM’, outputs will back to normal
(Disarm) status.
1.8
H
ISTORY REPORT
Flash memory for recording reports up to 3000 reports. It can be read out from the PC setup
program via serial port.
1.9
B
ACKUP BATTERY
(
OPTIONAL
)
The system has a built-in rechargeable battery for emergency use. The system will send a
power cut report when all the external power is disconnected.
1.10
LED
INDICATION
Three LED indicate the status of the POWER, GPRS signal and GPS signal.
1.11
K
EEP ALIVE PROCEDURE
