Lowes.com/portfolio
Lowes.com/portfolio
4
5
Hardware Used
BB
x 2
Cap nut
DD
x 2
EE
x 2
1
Crossbar
AA
x
ASSEMBLY INSTRUCTIONS
1
Machine screw
Mounting screw
1.Take off cap nuts (BB). Then attach the crossbar
(AA) by tightening the machine screws (DD)
securely into the outlet box (not included). The
mounting screws (EE) should protrude away
from the outlet box.
2.
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire.
Helpful
hint:
If necessary, attach copper ground wire
to grounded junction box.
2
Hardware Used
CC
x 3
Wire nut
3.
Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
3
AA
EE
BB
DD
CC
4. Screw threaded nipple and nut (D) to the base
of fixture (C). Place the round tube (E) and font
(F) around threaded nipple and nut (D), then
tighten with knob (G) until secure.
ASSEMBLY INSTRUCTIONS
4
6. Remove decorative nut (A), place cover (B)
onto the fixture (C). Secure with decorative
nut (A).
5
5. Install light bulb (not included). Use one 60-
watt max. standard-base bulb or one 13-watt
standard-base CFL bulb.
6
C
D
E
G
F
A
B
C
