Porter Center-Roll 2081 Installation, Operation & Maintenance Manual Download Page 4

 

4

MODEL No. 2080 CENTER-ROLL

®

 DIVIDER CURTAIN 

 
 

MANUAL OVERVIEW 

 
 

WARNING!  DO NOT ATTEMPT TO OPERATE THIS UNIT 

WITHOUT REVIEWING THE OPERATIONAL INSTRUCTIONS

 

 
 
 

This manual has been prepared to assist you with the installation, operation and maintenance of the Model No. 2080 Center-Roll

®

 divider 

curtain.  Enclosed in this manual is a maintenance inspection list for your equipment, including operational information.  We recommend that 
you read this manual to become familiar with the operation of the 2080 Center-Roll

®

, and then assign it to the person responsible for the 

maintenance and inspection program.  If you require additional copies of this manual, please call Porter Athletic Equipment Co. 
 
 

The safest equipment can be damaged when used by the untrained.  We suggest that qualified personnel supervise all utilized equipment.  

Refer to the operational instructions for further information concerning use of equipment.  For ease of administering this maintenance program, 
we suggest that your equipment be numbered and a file maintained of its location, name of manufacturer, original item number, date of 
purchase, and maintenance performed.  This will be useful when ordering replacement parts and keeping track of maintenance.  Defective 
equipment should be marked 

“DO NOT USE”

 until replacement or repairs are completed. 

 
 

Inspections should be performed periodically, depending upon the nature of the equipment and its use.  When the equipment is exposed to 

heavy use, special inspections should be made in addition to the normal maintenance program.  At minimum, a yearly inspection of the system 
is recommended.  Any structural and/or electrical deviation from the porter installation manuals and drawings, without written authorization, 
will void all warranties. 
 
 
 

 
 
 
 
 

MODEL No. 2080 CENTER-ROLL

®

 DIVIDER CURTAIN

 

 
 

OPERATIONAL INSTRUCTIONS 

 
 

WARNING!

 

 
 
 

The Model No. 2080 Center-Roll

®

 divider curtain is powered by a 110-volt electric torque motor assembly, which develops tremendous 

forces.  This equipment is only to be operated by qualified personnel to avoid structural damage or possible injury to the operator and other 
individuals in the gymnasium. 
 
 

Caution should be exercised at all times for safety reasons, keeping the following guidelines in mind. 

 
1.

 

ONLY

 authorized, 

TRAINED

 personnel are to operate the Model No. 2080 Center-Roll

®

 divider curtain.  Authorized personnel is defined 

as an individual (or individuals) who is at least 21 years of age, has witnessed the proper operation of the unit, and is sanctioned by the 
facility as being responsible for the operation of the divider curtain. 

 
2.

 

The key switch which controls the divider curtain, must be flush mounted on the wall in a location which is in full view of the divider 
curtain, and not directly beneath the equipment.  

 
3.

 

Always make sure the area below the divider curtain and in the path of travel is clear of all individuals or obstacles when raising or 
lowering the unit 

 

Summary of Contents for Center-Roll 2081

























Reviews: