English
9
In addition to the warranty,
PORTER-CABlE
tools are
covered by our:
1 YEAR FREE sERViCE: PORTER-CABlE
will maintain the
tool and replace worn parts caused by normal use, for free,
any time during the first year after purchase.
90 DAY MOnEY BACK gUARAnTEE:
If you are not
completely satisfied with the performance of your
PORTER-
CABlE
Power Tool for any reason, you can return it within
90 days from the date of purchase with a receipt for a full
refund – no questions asked.
lATin AMERiCA:
This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in the
packaging, call the local company or see
website for warranty information.
To register your tool for warranty service visit our website at
www.portercable.com.
WARning lABEl REPlACEMEnT
If your warning labels become illegible or are missing, call
(888) 848-5175 for a free replacement.
4825 Highway 45 North, Jackson, Tennessee 38305
(888) 848-5175 • www.portercable.com
Troubleshooting Guide
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the PORTER-
CABLE Customer Care Center at (888) 848-5175.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
-
Unit will not turn ON
-
Battery pack not
installed properly
-
Battery pack not charged.
-
Internal componets too hot.
-
Cord not plugged in.
-
Circuit breaker is tripped.
-
Cord or switch is damaged.
-
Check battery pack installation
-
Check battery pack charging
requirements.
-
Allow tool to cool down.
-
Plug tool into a working outlet.
-
Reset circuit breaker. (If the
product repeatedly causes
the circuit breaker to trip,
discontinue use immediately
and have it serviced at an
authorized PORTER-CABLE
service center.
-
Have cord or switch replaced
at an authorized PORTER-
CABLE service center
-
Battery pack will not charge.
-
Battery pack not inserted into
charger.
-
Charger not plugged in.
-
Surrounding air temperature
too hot or too cold.
-
Insert battery pack into
charger until LED illuminates.
-
Plug charger into a working
outlet. Refer to "Important
charging notes" for more
details.
-
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below 105
degrees F (+40,5°C).
-
Unit shuts off abruptly.
-
Battery pack has reached its
maximum thermal limit.
-
Out of charge.
(To maximize
the life of the battery pack
it is designed to shut off
abruptly when the charge is
depleted.)
-
Allow battery pack to cool
down.
-
Place on charger and allow to
charge.