Porter & Charles CC30S, Operation Manual

Page: 5 / 16

5
WARNING
All operations relative to installation and electric connection should be carried out by
qualified personnel in conformity with the regulations in force in your country.
The specific instructions are described in the booklet section for the installer
NOTICE
•
Use only flat pans with a sufficiently thick base, equal to or not much larger than the hot plate selected (fig.1)
•
The containers should not have rough bottoms in order to avoid scratching the heat surface of the top.
•
Do not switch the electric plate on without the pan over the plate.
•
Do not cook any food directly on the hot area. Avoid overflows of liquid and should they occur clean away
promptly.
•
Turn off the plate few minutes before the cooking end.
USE
Model with knob control switches
Switching on
Set the power by rotating the knob, taking into consideration that the highest number corresponds with the
maximum power. If the hob is fitted with extended zones, the outer heating element can be switched on turning
the knob up to the end of rotation.
The pilot light is switched ON when at least one element is on. The pilot light is switched ON when the top
temperature at indicated spot is higher than 50
O
C.
Model with touch control switches
Switching on
Using the Appliance