14
RAIL SAW SR-10-26-O & SR-10-26-1
ORIGINAL OPERATION MANUAL
4
Design and function
4.1
Design
Figure 2 Overall design
No.
Description
1
Couplers
2
Blade guard
3
Handles
4
Start / stop lever
5
Trigger lock
6
Rail clamp
The Rail Saws require a flow of 10 gpm (38 lpm) at 2000 psi (138 bar) for best performance. Use this tool on an open center
hydraulic system only with a maximum pressure of 2150 psi (148.3 bar).
The saw mounts to the rail clamp (6) which is secured to the rail and pivots at two positions from the top of a tower, which allows
for a wide range of movement. The rail clamp has a cut indication marker for precise positioning of the cut.
The hydraulic hoses connect to the couplers (1) near the handle.
The operator is protected from the blade by a rotating blade guard (2) which automatically rotates during cutting to stay between
the blade and the operator.
