Portable Winch 600MH, User Manual

Page: 18 / 116

EN
3
2. Checks before use
2.1 Upon reception
Inspect the box to detect any obvious damage. If a part is missing
or damaged, notify the carrier immediately. Please refer to the
assembly manual for the contents of your machine.
2.2 Assembly and start-up
2.2.1 Assembly
2.2.2 Battery (sold separately)
2.2.3 Installing the battery
2.2.4 To remove the battery
The Perimeter Wire Machine 600MH-Li
TM
was
completely assembled at the factory except for the
following parts: blade, wire guide, sliding foot, blade
pulley cover, wheels and handle. To ensure safe
and appropriate operation, these parts must be
attached securely. Use the
appropriate wrench to
ensure they are tightened sufficiently.
To assemble the components mentioned above,
please follow the instructions in the 600MH-Li
USER MANUAL.
IT IS ESSENTIAL THAT ALL OF THE STEPS
ARE CARRIED OUT
IF THE MACHINE STARTS TO VIBRATE ABNORMALLY,
STOP THE ENGINE AND CHECK IMMEDIATELY FOR THE
CAUSE. STRONG VIBRATIONS ARE USUALLY A SIGN
SOMETHING IS WRONG.
STOP THE ENGINE BEFORE CLEANING, INSPECTION OR
REPAIRS.
BOLTS AND NUTS, ESPECIALLY THE BOLTS USED TO
ATTACH THE BLADE SHOULD ALWAYS BE PROPERLY
TIGHTENED. KEEP THE MACHINE IN GOOD
CONDITION.
NEVER TAMPER WITH SAFETY DEVICES. REGULARLY
CHECK THEY ARE WORKING PROPERLY.
KEEP GRASS, LEAVES OR DEBRIS OF ANY KIND FROM
ACCUMULATING ON THE MACHINE OR IN FRONT OF
THE BLADE. CLEAN OIL OR FUEL SPILLAGES.
ALLOW THE MACHINE TO COOL BEFORE STORING IT.
IF YOU HIT AN OBJECT, STOP THE MACHINE AND
CHECK FOR DAMAGE. BEFORE RESTARTING, REPAIR
THE DAMAGE IF NECESSARY.
THE MACHINE'S BLADE CAN CUT. WRAP THE BLADE OR
WEAR GLOVES AND BE CAREFUL WHEN PERFORMING
MAINTENANCE ON THE BLADE.
THE BATTERY IS HALF-CHARGED AT THE TIME OF
PURCHASE. BEFORE USING YOUR MACHINE FOR THE
FIRST TIME, FOLLOW ALL THE INSTRUCTIONS AND
GUIDELINES INDICATED IN THE BATTERY AND CHARGER
MANUFACTURER
GUIDES. REMOVE THE BATTERY
BEFORE STORING THE MACHINE FOR AN EXTENDED
PERIOD. FULLY CHARGE THE BATTERY BEFORE USING
THE
MACHINE AGAIN. THIS BATTERY HAS NO
MEMORY EFFECT.
A) Press the battery release button
located above the battery. This allows
the battery to easily be removed from
the device.
B) Remove the battery
1 A
1 B
A) Open the battery's protective
cover.
B) Insert the battery (plastic part towards the compartment).
C) Press the battery in until you
hear a ''click''.
D) Close the cover
A
1 B 1 B
1 D 1 C