62
PHONE
1.
Press the
c
button.
2.
Press the
i
button or touch the tab of
the same name in the header.
> Select "
Bluetooth settings
".
> "
New device
".
A search is started and a list of the
telephones found is displayed.
3.
Choose the desired device by selecting it in the
list.
A
Bluetooth
code is displayed that you must
enter in the corresponding
Bluetooth
device.
Once you have entered the code, successful
authorization of the device is shown on the
display.
4.
The connection is automatically established by
the PCM.
With some cell phones, the connection
request by the PCM must be explicitly
confirmed on the cell phone. This may even
have to be done a number of times in some
cases, for example before transferring the
phonebook. To avoid this request, you can
authorize the PCM in your cell phone's list of
devices. The connection will then be
established automatically and without the
need for further checks in future.
It can take a few seconds for the
Bluetooth
device to be authorized.
>>>
If the list of authorized
Bluetooth
devices is full
(max. 5 cell phones), you must first delete a
device from the list. An appropriate message
will be displayed. To find out more, please
refer to the section "Deleting an authorized
Bluetooth device from the list" on page 61.
Establishing a connection from the
external
Bluetooth
device
If the PCM does not find your cell phone or a
connection attempt by the PCM fails, you can also
start the authorization from the cell phone.
1.
If another cell phone is connected to the PCM,
switch off
Bluetooth
on the connected cell
phone to disconnect the connection with the
PCM.
2.
Press the
c
button.
3.
Press the
i
button or touch the tab of
the same name in the header.
4.
Using the cell phone, search for audio
accessories or devices that support
Bluetooth
. Refer to the manufacturer's
operating instructions to find out how to do
this.
5.
Select the device „PCM“ in the search list of
the cell phone and establish the connection.
Refer to the manufacturer's operating
instructions to find out how to do this.
6.
A request appears on the PCM display.
Select "
Accept
".
7.
Enter any 4-digit code in the appearing keypad
and confirm it with OK.
8.
Enter the same
Bluetooth
code in your cell
phone.
Once you have entered the code, successful
authorization of the device is shown on the
display.
9.
With many cell phones, the connection with the
PCM must be explicitly established from the
cell phone following authorization. Further
details can be found in the operating manual
for your cell phone.
With some cell phones, the
Bluetooth
code
must be directly provided by the cell phone
during the connection request. If this is the
case, enter any 4-digit code in your cell phone
and confirm it with OK. You will then be shown
a keypad on the PCM display where you must
enter the same code and confirm it.
