160
Voice Control
Station search
You start the search in the FM or AM waveband
using the "next station" or "previous station"
command. The search scans upwards or
downwards and automatically stops at the next
receivable station.
Automatic station search (autostore)
The automatic station search function fills the
memory of the preset memory currently selected
with the six stations with the strongest reception
signal at the present time.
Any stations that have already been stored
(e.g. manually stored) are overwritten.
This function is not available for the
Best FM
and
MIXED
preset memories.
Example for entering an autostore in the preset
memory FM1:
û
Activate voice control.
;
Beep
Ò
y
"Autostore FM1".
;
"Autostore FM1".
The PCM starts the function.
Starting/stopping the scan function
If you activate this function, every station found in
the frequency range is played for approx. 5
seconds.
û
Activate voice control.
;
Beep
Ò
y
"Start scan".
;
"Start scan".
The PCM plays the stations one after the other.
û
Activate voice control.
;
Beep
Ò
y
"Stop scan".
;
"Stop scan".
The PCM tunes to the station currently playing.
Switching the traffic program on and off
You switch the traffic program on and off using the
"activate set TP" and "deactivate set TP"
commands.
Tuning to stations from the station list
The station list is available in the FM waveband and
contains all currently receivable stations.
û
Activate voice control.
;
Beep
Ò
y
"Station list".
;
"Station list".
The station list is displayed.
û
Scroll in the list if necessary using the "scroll
down" and "scroll up" commands until you see
the desired station.
The following two options are available to you for
tuning to a station:
y
"Station KFOG.
;
"Station KFOG".
The PCM tunes to the station KCRW.
-
or
-
y
"Line number 3".
;
"Line 3".
The PCM tunes to the corresponding station.
