24
TUNER
1.
Keep pressing the
m
button until the
desired mode is highlighted.
2.
Select "
Preset memory
".
The available preset memories are listed.
3.
Select the desired preset memory.
4.
Touch the
m
tab in the header again.
Choosing a station in the station list and
storing it
1.
Keep pressing the
m
button until "
FM
"
is highlighted.
2.
Press the
i
button or touch the tab
of the same name in the header.
3.
Select "
Station list
".
4.
Select the desired station entry by pressing it
for a few seconds.
The station buttons are displayed and the
station previously chosen is shown in the
information window.
5.
To store the station on a station button, select
the desired station button.
The station list is displayed once more.
Storing via an automatic station search
(autostore)
The automatic station search function is only
available for the preset memories FM 1, FM 2, FM
3 as well as AM 1 and AM 2.
1.
Keep pressing the
m
button until the
desired mode is highlighted.
2.
Set the preset memory if applicable
(> page 23).
3.
Select the "
Autostore
" menu item.
The search starts. It stores the six stations
with the strongest signals and tunes to the one
with the strongest signal.
Manually storing stations
1.
Keep pressing the
m
button until the
desired mode is highlighted.
2.
Tune to the station (> page 22).
3.
Set the preset memory if applicable
(> page 23).
4.
Press and hold the station button for a few
seconds.
As soon as the station is stored on the station
button, the station name or the station
frequency is displayed on the button and you
hear an audible signal.
Traffic program
Various FM radio stations broadcast traffic
messages in addition to their radio program.
The broadcasting stations are responsible for the
quality of these traffic messages. For that reason,
no liability can be accepted for the completeness
and correctness of the information.
Traffic messages are part of the RBDS signals and
are not available everywhere. To find out more,
please refer to the sections "Switching RBDS on
and off" on page 25.
Turning the traffic program on
1.
Keep pressing the
m
button until
FM
is
highlighted.
2.
Press the
i
button or touch the tab
of the same name in the header.
3.
Select "
Traffic prog.
" to switch the function
on
( ) or off ( ) .
When the traffic program is switched on, you
will hear the traffic messages regardless of the
audio source playing at the time.
