158
Voice Control
-
or
-
û
Say the "Line number" command, directly
followed by the row number to the right of the
row.
Non-voice-controlled lists
With non-voice-controlled lists, you can only select
a row using the row number.
û
Say the "Line number" command, directly
followed by the row number to the right of the
row.
Reading out list contents
In voice-controlled lists you can have the list
contents read out. The PCM starts with the
highlighted list row and reads out the list down to
the last row.
û
Say the "read out" command.
Operating examples
The voice control system is designed so that you
can say each menu item shown on the display.
Exceptions are indicated by an appropriate
message on the display of the PCM.
If you have activated the "Show hints" function, the
PCM also shows you the most relevant commands
possible at that time as soon as you are prompted
to enter a command. To find out more, please
refer to the section "The following options are then
available for you to select:" on page 156.
Due to the large number of control options, we
have chosen to provide a number of operating
examples on the following pages instead of a full
listing of all voice-controlled functions.
Operating example for radio mode
Calling up radio mode and switching
waveband
û
Activate voice control.
;
Beep
Ò
y
"Tuner".
;
"Tuner".
The PCM switches to radio mode if another
mode was active prior to the command being
entered. If radio mode was already active, the
waveband is switched.
Tuning to a currently receivable FM station
If you know the currently receivable FM stations
and if radio mode is your active audio source, you
can tune to the desired station by saying its name.
û
Activate voice control.
;
Beep
Ò
y
"Station KFOG".
;
"Station KFOG".
The PCM tunes to the corresponding station.