Page 24 Emhart Teknologies - 50 Shelton Technology Center, Shelton CT 06484 - Tel. (203) 924-9341 - Fax (800) 225-5614
Safety Data
SEAL LUBE (P/N: PSA075508P)
LUBRIPLATE
®
130-AA
Manufactured by:
Fiske Brothers Refining Co.
Phone: (419) 691-2491
Emergency: (800) 255-3924
ALVANIA
®
EP Grease 1
Prod Code: 71124
Manufactured by:
Shell Oil Products
Phone: (877) 276-7285
MSDS#: 57072E-5
First Aid:
SKIN:
Remove any contaminated clothing and wash with soap
and warm water. If injected by high pressure under
skin, regardless of the appearance of its size, contact a
physician IMMEDIATELY.
Delay may cause loss of affected part of body.
INGESTION:
Call a physician immediately. Do not induce vomiting.
EYES:
Flush with clear water for 15 minutes or until irritation
subsides. If irritation persists, consult a physician.
Fire:
FLASH POINT: COC- 400°F
Cool exposed containers with water.
Use foam, dry chemical, carbon dioxide or water spray.
Environment:
WASTE DISPOSAL:
Assure conformity with applicable disposal regulations.
Dispose of absorbed material at an approved waste
disposal facility or site.
SPILLAGE:
Scrape up grease, wash remainder with suitable
petroleum solvent or add absorbent.
Handling/ Storage:
Keep containers closed when not in use. Do not handle
or store near heat, sparks, flame or strong oxidants.
Lubriplate
®
is a registered trademark of Fiske Brothers
Refining Company.
Please refer to the actual MSDS for complete safety
and handling information. These can be obtained from
the point of purchase.
