Emhart Teknologies - 50 Shelton Technology Center, Shelton CT 06484 - Tel. (203) 924-9341 - Fax (800) 225-5614 Page 23
Problem
Cause
Action
Section
Life of the Mandrel
Replace the Mandrel
Tool Setup,
Mandrel and
Nosepiece
installation
The setting force is excessive Adjust the setting force
correctly
Replace the damaged parts
Setting Force
Adjustment
Tool Setup,
Mandrel and
Nosepiece
installation
The Mandrel is
damaged, and/or
broken
Tool is not perpendicular to
the work piece during
installation
Review the proper operating
procedure
Replace the damaged parts
Basic Tool Operation
Tool Setup,
Mandrel and
Nosepiece
installation
Too little hydraulic oil
Recharge the hydraulic oil
Maintenance
Tool cannot be
adjusted to achieve
a proper
installation
Too much hydraulic oil or air is
mixed in hydraulic oil
Recharge the hydraulic oil
Maintenance
