38
10.3
Main parameters
System settings can be checked and changed using the remote control by following the steps below
10. Appendices
CAUTION
:
This operation is used to facilitate maintenance and future repairs.
Only an experienced professional is authorized to change the default settings
Step 1:
Press the button
until the icon
flashes to
enter the general heat pump settings.
Step 2:
Press the arrow
to enter the password 138.
Step 3:
enter the correct value using the
and
but-
tons, then validate with the button
Step 4:
Scroll through the codes of the main parameters
using the
and
buttons.
Step 5:
Press the button
to enter the desired setting.
Step 6:
Modify the desired value with the
and
buttons.
Step 7:
Press the button
to validate the value change,
then long press
to return to the main menu.
