25
4.10 Pairing the heat pump
4.10.1 EZ Mode
Note: The flashing stops when the box is connected to WiFi
Step 1 :
Now start the pairing.
Choose your home WiFi network, enter the WiFi password and press «Confirm».
Step 2 :
Activate the pairing mode on your heat pump according to the following
procedure:
The procedure depends on the model of your control box:
CAUTION The «Smart Life» application only supports 2.4GHz WiFi networks.
If your WiFi network uses the 5GHz frequency, go to the interface of your home WiFi network to create
a second 2.4GHz WiFi network (available for most Internet boxes, routers and WiFi access points).
Press + simultaneously for
5s,
flashes quickly, the control
box is ready to be paired.
The pairing is successful, you can rename your Poolex heat pump then press «Done».
Congratulations, your heat pump can now be controlled from your smartphone.
4. Use
