12
Start by installing the pre-filters in your swimming pool. They prevent large foreign
bodies from damaging the pump or its motor.
Then install the connection pipes to the swimming pool and to the 32/38 fittings of the
filtration unit and tighten them with the clamps provided.
The water is sucked in through the low inlet of the filtration unit while the delivery is
through the top side.
Warning:
Check that all hoses are properly ins
-
talled and tightened, that they are not pinched and
that there is sand or other filter media in the filter.
Warning:
Make sure the product is properly protec
-
ted against current leakage.
Warning:
Never start the filter if the 6-way valve is
in the «closed» position (5).
To operate the control valve, press the valve lever
and then turn the valve to the required position.
NEVER HANDLE THE VALVE WHILE THE
PRODUCT IS FUNCTIONNING.
Connecting your filtration group to your swimming pool.
Handling the 6-way valve
