7
5.2. The Automatic Lock
If there is no
any manual operation in 1
minutes or press "
" in standby status, the control display would be
locked.
Press "
", and the display will be unlocked. The "lock" on the screen will disappear.
5.3. Time setting
1) Press "
"or ''
"to enter time setting status in the standby status and on the condition that the pre-heating
setting and circulation cleaning setting are off. The display shows "SYSC".
2) Press"
" to control hour (0-23)
3) Press"
"to control minute (0-59)
4) The system automatically saves the time after waiting 6 seconds.
5.4. The setting of circulation cleaning
All settings of circulation cleaning need to be set on the condition of the standby status (the display shows "---")
1) Press "
" to enter circulation cleaning setting status, then display shows "FLON", and the mark of "FLON" would
flicker. Circulation cleaning is turned on, and the start time of circulation cleaning can be set up now.
Press "
" again to exit the setting and turn off the circulation cleaning at the same time.
2) Press "
"(hour) and "
"(minute) to set the start time of the circulation cleaning
Press"
" to control hour (0-23)
Press"
"to control minute (0-59)
3) Press"
" to enter working hours setting status of circulation cleaning (diagram2). Then display shows "FLDU",
and the mark of "FLDU" would flicker.
Press "
" each time to increase 5 minutes, press "
" each time to increase 1 hour. The longest working time is
19 hours and 55 minutes. Minimum working time is 5 minutes.
