9
*****NOTICE*****
*All settings of pre-heating should be done in standby status.
*The circulating pump and heater would not work during the process of setting.
*Please pay attention to "ON" or "OFF" on the display, "ON" means that the heater is working right now. "OFF" means
that the heater has not worked.
*If the water temperature is higher than the setting temperature,the heater and circulating pump would not turn on.
Exit
pre-heating
mode:
In the standby
status
, press “
”twice and “
”
disappears from the display.
5.6. Switch between power-on and standby status
At standby status, press"
" to enter power-on status and the display show ”WELCOME”. At the power-on status,
press"
" to enter standby status.
5.7. Temperature setting
Press “
”or keep pressing”
” to adjust the temperature from15C°to 42C° when the heater is working at the
power-on status.
This temperature setting does not affect the pre-heating setting temperature.
5.8. Radio/Bluetooth
"
" is the on/off button of the radio and Bluetooth, which can only be operated at the power-on status.
Press "
" for the first time to turn on the radio;
press "
" for the second time to turn off the radio and turn on Bluetooth at the same time
press "
" for the third time to turn off the radio and turn off Bluetooth at the same time.
Radio
1) Press"
" to turn ON/OFF radio at power-on status.
2) Current frequency will be shown on the display.
3) Current frequency can be changed by pressing“
” and “
”
4) Volume can be changed by pressing “
” and “
”
Hold the "
" button, the system will store all the stations actually searched, and the "MHZ" on the display flashes
during the auto-receiving process. When the search is over, the "MHZ" stops flashing.
Press "
" to play the next memory channel.
5) User can press the "
" (the display will show "SAVE")to save the channel.
Bluetooth
