background image

10

Only applies to the models equipped with Bluetooth.

Bluetooth name: BT-AUDIO

Bluetooth coverage: 10 meters

When user want to increase/decrease the volume, user need to adjust the volume of the phone instead of the spa

display.

5.9. The Operation Of Pumps: Setting of Water Pump

The water pumps only work when the system is at power-on status.

*The button of Water Pump 1(

) is for controlling the Water Pump 1.

*The button of Water Pump 2/3(

) is for controlling the water pump 2/3, if the Spa is equipped with

two water pumps; if the SPA is equipped with only one Water Pump, those buttons would not be functional.

*The button of filter pump(

) is for controlling the filter pump.

5.10. The operation to long time circulation

The long time circulation only work when the system is at power-on status.

Press the "

" to turn on/off the long time circulation. Ozone will run for 15 minutes every 120 minutes.

*Ozone will not work when the water pump or blower is turned on.
*Ozone will not work when the circulating pump is turned off.

5.11. Bottom light

The bottom light only work when the system is at power-on status.
Press"

" to turn the bottom light ON/OFF.

Press “

”twice in succession to change the color

The light will automatically turn off after 2 hours.

5.12. Heating operation

The heating operation only work when the system is at power-on status.

1) When the Pre-heating has been set and the time is up, or to press the “

” 2 times can start the heater.

press the “

” first time to start the circulation pump and press the “

” again to start the heater.

3) For example: if the temperature is set at 35

°C

, the heater will be off automatically when the water

temperature reaches 36

°C

or above.

4) When the water temperature is lower than 34

°C

, the heater would be on again.

4) When the temperature sensor is not installed well, the auto-thermostatic system would not be functional.

Summary of Contents for Gamma 4 OS030981K

















Reviews: