Pontiac Montana SV6 2007, Owner'S Manual

Page: 486 / 574

1. Loosen the wheel
nuts using the
folding wrench,
but do not
remove them.
Turn the handle counterclockwise about
180 degrees, then flip the handle back to
the starting position. This avoids taking the
wrench off the lug nut for each turn.
Notice: If your vehicle has wheel locks and you
use an impact wrench to remove the wheel nuts,
you could damage the lock nut or wheel lock
key. Do not use an impact wrench to remove the
wheel nuts if your vehicle has wheel locks.
Notice: If you use a jack to raise the vehicle
without positioning it correctly, you could
damage your vehicle. When raising your vehicle
on a jack, avoid contact with the rear axle
control arms.
Notice: If you position the jack under the
rocker molding and attempt to raise the vehicle,
you could break the molding and/or cause other
damage to your vehicle. Always position the
jack so that when the jack head is raised, it will
fit firmly in the notch located inboard from the
rocker molding.
A. Front Location
B. Rear Location
486