Pontiac Montana SV6 2007, Owner'S Manual

Page: 17 / 574

Folding or Reclining the Seatbacks
The seatback on a bucket seat can either
be folded forward or reclined using the nylon
strap or the recline lever.
To fold the seatback forward, do the following:
1. Pull the nylon strap, located on the rear right
hand side of the seat, or lift the recline lever,
located on the front right hand side of the
seatback to release the seatback.
Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
2. Fold the seatback forward.
{
CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on
the seatback to be sure it is locked.
To raise the seatback to the upright position from
a reclined position, do the following:
1. Pull the nylon strap or lift the recline lever
while raising the seatback until it locks to
the upright position.
2. Push and pull on the seatback to check that it
is locked.
Nylon Strap Recline Lever
17