To use the auxiliary audio and video inputs,
connect an external auxiliary device such as a
camcorder to the RCA jacks and turn on both the
auxiliary device power and the power on the
front of the RSE player.
If a disc is present when the RSE power is turned
on, the player may automatically begin playing the
disc. Press the AUX button on the remote control or
the DVD AUX button on the DVD player faceplate
to switch the system between the DVD player and
the auxiliary device. See “DVD Player” and
“Remote Control” later in this section for more
information.
Audio Output
Audio from the DVD player or auxiliary devices
can be heard through the following sources:
•
Vehicle Speakers
•
Wireless Headphones
•
Wired Headphones (not included)
Vehicle Speakers
Only one audio source can be heard through the
vehicle’s speakers at a time.
The RSE system or an auxiliary device can be
heard through all of the vehicle’s speakers when
the following occurs:
•
A DVD or auxiliary device is playing
•
The front audio system is on and the CD AUX
button is pressed to enable the RSE system
DVD appears on the radio display when the RSE
system is on.
To turn the vehicles speakers on and off, press the
CD AUX button on the radio. The audio from the
RSE system can be heard through the wireless
headphones and the vehicles speakers at the same
time. The volume on the radio may vary when
switching between the radio, CD, DVD, MP3,
or an auxiliary device.
312
Summary of Contents for Montana SV6 2007
