manualshive.com logo in svg

Pontiac 2001 Grand Am, Owner'S Manual

Share
Download
Pontiac 2001 Grand Am Owner'S Manual Download Page 94

2-24

PARK (P): This position locks your front wheels. It’s
the best position to use when you start your engine
because your vehicle can’t move easily.

CAUTION:

It is dangerous to get out of your vehicle if the
shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll.

Don’t leave your vehicle when the engine is
running unless you have to. If you have left the
engine running, the vehicle can move suddenly.
You or others could be injured. To be sure your
vehicle won’t move, even when you’re on fairly
level ground, always set your parking brake and
move the shift lever to PARK (P).

See “Shifting Into PARK (P)” in the Index. If
you’re pulling a trailer, see “Towing a Trailer” 
in the Index.

Ensure the shift lever is fully in PARK (P) before
starting the engine. Your vehicle has an automatic
transaxle shift lock control system. You have to apply
your regular brake before you can shift from PARK (P)
when the ignition key is in ON. If you cannot shift out
of PARK (P), ease pressure on the shift lever and push
the shift lever all the way into PARK (P) and as you
maintain brake application. Then move the shift lever
into the gear you wish. (Press the shift lever button
before moving the shift lever.) See “Shifting Out of
PARK (P)” later in this section.

REVERSE (R): Use this gear to back up.

NOTICE:

Shifting to REVERSE (R) while your vehicle is
moving forward could damage your transaxle.
Shift to REVERSE (R) only after your vehicle 
is stopped.

To rock your vehicle back and forth to get out of snow,
ice or sand without damaging your transaxle, see “Stuck
In Sand, Mud, Ice or Snow” in the Index.

Summary of Contents for 2001 Grand Am






















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands