manualshive.com logo in svg

Pontiac 2001 Grand Am, Owner'S Manual

Share
Download
Pontiac 2001 Grand Am Owner'S Manual Download Page 284

6-43

CAUTION:

Using the wrong replacement wheels, wheel bolts
or wheel nuts on your vehicle can be dangerous.
It could affect the braking and handling of your
vehicle, make your tires lose air and make you
lose control. You could have a collision in which
you or others could be injured. Always use 
the correct wheel, wheel bolts and wheel nuts 
for replacement.

NOTICE:

The wrong wheel can also cause problems with
bearing life, brake cooling, speedometer or
odometer calibration, headlamp aim, bumper
height, vehicle ground clearance and tire or tire
chain clearance to the body and chassis.

See “Changing a Flat Tire” in the Index for 
more information.

Used Replacement Wheels

CAUTION:

Putting a used wheel on your vehicle is
dangerous. You can’t know how it’s been used or
how far it’s been driven. It could fail suddenly
and cause an accident. If you have to replace a
wheel, use a new GM original equipment wheel.

Summary of Contents for 2001 Grand Am






















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands