manualshive.com logo in svg

Pontiac 2001 Grand Am, Owner'S Manual

Share
Download
Pontiac 2001 Grand Am Owner'S Manual Download Page 223

5-10

If you no longer have the overheat warning, you 
can drive. Just to be safe, drive slower for about 
10 minutes. If the warning doesn’t come back on, 
you can drive normally.

If the warning continues, pull over, stop, and park your
vehicle right away.

If there’s still no sign of steam, idle the engine for 
three minutes while you’re parked. If you still have the
warning, turn off the engine and get everyone out of 
the vehicle until it cools down.

You may decide not to lift the hood but to get service
help right away.

Cooling System

When you decide it’s safe to lift the hood, here’s what
you’ll see:

A. Coolant Surge Tank with Pressure Cap

B. Electric Engine Cooling Fans

Summary of Contents for 2001 Grand Am






















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands