manualshive.com logo in svg

Pontiac 2001 Grand Am, Owner'S Manual

Share
Download
Pontiac 2001 Grand Am Owner'S Manual Download Page 56

1-44

Anchor the top strap to one of these anchor points. 
Be sure to use an anchor point located on the same side
of the vehicle as the seating position where the child
restraint will be placed.

Once you have the top strap anchored, you’ll be ready to
secure the child restraint itself. Tighten the top strap
when and as the child restraint manufacturer’s
instructions say.

Lower Anchorages and Top Tethers for
Children (LATCH System)

Your vehicle may have the LATCH system. You’ll find
anchors (A) in the rear outside seat positions.

In order to use the system, you need either a
forward

-

facing child restraint that has attaching 

points (B) at its base and a top tether anchor (C), or a
rear

-

facing child restraint that has attaching points (B),

as shown here.

Summary of Contents for 2001 Grand Am






















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands