P O N D M A X . C O M
PHOTOCELL LIGHT SENSOR (OPTIONAL)
The hotocell ight ensor is an item purchased separately to provide your PondMAX lighting system with the ability
to turn on automatically at dusk and turn off at dawn.
INSTALLATION
• The dusk-till-dawn hotocell ensor (3) comes with an additional 3 t ransformer dapter able (2). This adapter
cable must be used to connect the photocell from the “Inlet” port, directly to the ransformer (1).
• Then use the 3 t ransformer dapter able (4) that is provided with your light, to connect to the “Outlet” port of the
hotocell ensor (3).
• Tighten the rubber nuts to ensure safe connections.
• Mount the hotocell ensor 12 inches (0.3M) above the ground and at least 10 t (3.5m) from the water feature.
• Make sure that the photo eye on top of the hotocell ensor is fully exposed to the daylight and is clear of any
foliage. Also make sure it is free from the beam of any lights, which may be on at night. This will prevent it from
working correctly.
MAINTENANCE
• Do not submerge the hotocell ensor.
• Keep the photocell lens on top of the unit clean from dirt and other debris.
* ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY
1.
2.
3.
4.
P O N D M A X . C O M
