background image

WAT E R G A R D E N I N G   T O   T H E   M A

Please consult your retailer for quality original PondMAX replacement parts.

Visit www.pondmax.com for your nearest dealer. 

WAT E R G A R D E N I N G   T O   T H E   M A X

COLOR CHANGING LED 

LIGHTING SYSTEM

LIMITED WARRANTY 

• This product is warranted to the initial purchaser 

to be free of defects in materials and manufacture 
workmanship at the time of initial purchase and for a 
period of 2 years aFter. Some parts are consumable and 
may need to be replaced as part of ongoing product 
maintenance and are not covered by this Warranty. In 
the event this product malfunctions within 2 years from 
the date of purchase, the sole obligation of PondMAX™ 
International (hereinaFter referred to as PondMAX™ ) 
will be to repair the unit or replace with an equivalent 
new or factory refurbished unit at PondMAX’s 
discretion, subject to the following condition:

• The malfunction is proved attributable to a defect 

in materials or manufacture workmanship, including 
repairs performed under this warranty. Malfunction for 
any other reason including but not limited to misuse, 
negligence, accident, or tampering with parts, incorrect 
wiring, or improper installation-will not be remedied 
under this warranty.

• PondMAX™ specifically does not guarantee chemical 

compatibility, and expressly does not warrant units from 
any problems caused by chemical attack or failure due 
to incompatibility of fluid used near this lights system.

• All warranty repairs must be performed by PondMAX™ 

or a PondMAX™ authorized company.

• Purchaser must retain the purchase receipt and present 

it with this certificate as proof of ownership and 
entitlement to warranty repairs. Unauthorized repairs 
will not be compensated by PondMAX™, and are not the 
responsibility of PondMAX™, and if such repairs damage 
the product, such damages are not remedied under this 
warranty.

• Purchaser shall bear all onsite labor, shipping, packing 

and insurance costs and all other costs, excluding in 

under this warranty. 

• This warranty is in lieu of all other express warranties 

which now or hereaFter might otherwise arise with 
respect to this product. Any and all limited warranties, 
including the warranties of merchantability and fitness 
for particular purpose, shall have no greater duration 
than the duration period of the express written 
warranty applicable to this product, and shall terminate 
automatically the expiration of such duration period. 

• Some states do not allow limitations on how long an 

implied warranty lasts, so the above limitation may not 
apply to you. No action shall be brought for breach 
of any implied or express warranty aFter one year 
subsequent to the expiration of the duration period of 
the express written warranty.

• Incidental and consequential damages caused by 

malfunction, defect, or otherwise, and with respect 
to breach of any express or implied warranty, are not 
the responsibility of PondMAX™, and, to the extent 
permitted by law, are hereby excluded for property 
damage, loss of livestock and, to the extent not 
unconscionable, for personal injury damage. Some 
states do not allow the exclusion or limitation of 
incidental or consequential damages, so the above 
limitation or exclusion may not apply to you.

• This warranty does not apply to any malfunction arising 

out of any application of this product other than normal 
use, unless such application is upon request specifically 
approved in writing by PondMAX™.

• The provisions of this warranty are severable and if 

any provision shall be deemed invalid, the remaining 

• Rights under this warranty are not assignable without 

the express prior consent in writing by PondMAX™ and, 
regardless of the terms of such consent in writing, such 
assignee shall have no greater rights than his assignor 
had against PondMAX™.

Please consult your retailer for quality original PondMAX replacement parts.

Visit www.pondmax.com for your nearest dealer. 

888.868.1185 

[email protected]

14

Summary of Contents for 24PL680

















Reviews: