Pompetravaini TRSK 2002/1, Operating Manual, Page: 3 / 32

Operating manual liquid ring vacuum pumps TRVK - TRSK
3
INDEX
1 - General instructions
1.1
- General instruction
1.2 - Reading template
2 - Safety instructions
3 - In case of emergency
3.1 - Basic first aid
4 - Pump outlines
4.1 - Principle of operation
4.2 - Service liquid properties
4.3 - Pump models number
5 - Uncrating, lifting and moving instructions
6 - Storage instructions
7 - Mounting and alignment instructions
7.1 - Assembly of base mounted pump unit
7.2 - Alignment procedures for monoblock and for
pump/motor assembly on baseplate
7.3 - Alignment instructions
7.4 - Belt drives alignment procedure
8 - Electrical connections
9 - Installation instructions
9.1 - Piping connections
9.2 - Accessories
9.3 - Installation schematics for vacuum pumps
9.3.1 -Service liquid: Once-through system
(no recovery)
9.3.2 -Service liquid: Partial recovery system
9.3.3 -Service liquid: Total recovery system
9.4 - Pump engineering data
10 - Check list prior to start-up
11 - Starting, operating and stopping procedures
11.1 - Start-up
11.2 - Operation
11.3 - Shut down
12 - Operating maintenance
13 - Bearings, mechanical seals and packed
stuffing boxes maintenance
13.1 - Bearings
13.2 - Mechanical seals
13.3 - Packed stuffing boxes
13.3.3 - Adjustment of the packing
13.3.2 - Replacement of the packing rings
14 - Trouble shooting: problems, causes and
solutions
15 - Repairing and removing pump from the
installation
16 - Spare parts
17 - Engineering data
17.1 - Influence of service liquid temperature, specific
gravity and viscosity on pump performance
17.2 - Service liquid temperature change across the
pump
17.3 - Units conversion table
In preparing this manual, every possible effort has been made to help the customer and operator with the proper installation and operation of the pump
and/or system. Should you find errors, misunderstandings or discrepancies please do not hesitate to bring them to our attention.