POMCube PBT-LI409100S2, User Manual

Page: 31 / 42

28
Basic Operations
Boot System
DANGER:
Strictly follow the procedure to boot the system.
DANGER: Proceed to the following steps only after installation checklist is
completed.
(1)
Switch on the POWER switch on the BCMS module, press START button for
1 second and release. Wait approximately 60 seconds for the BCMS and
Battery Modules to initialize. All LED indicators on battery modules shall be
solid green and you will hear the beep of contactor closing.
(2)
Network indicator shall be solid red then blinking red. If it’s already
connected to a router or extender via cable or Wi-Fi, the network indicator
shall be blinking green until it turns to solid white. If it’s already Internet
connected, the indicator will turn to solid green.
(3)
If everything works as expected, the system should function normally now.
Shut Down System
DANGER:
Strictly follow the procedure to shut down the system.
Switch off the POWER switch on the BCMS module to shut down the
system.
Reboot System
(1)
Shut down Mega per procedures in Section 6.2 Shut Down System.
(2)
Wait until All LEDs are off.
(3)
Reboot the system per procedures in Section 6.1 Boot System.
Getting Started with the APP