POLYPRINT SA – TEXJET OPERATION MANUAL V6.4 EN
- 5 -
2.
Safety Instructions
Read these instructions carefully
before operating the equipment.
Follow the instructions given in this
manual or directly on the machine and
the accessories, to prevent damage to
the equipment or your health.
Warning, Cautions, and Notes
Warnings
must be followed carefully
to avoid bodily injury.
Cautions
must be observed to avoid
damage to your equipment
Notes
contain important information
and useful tips on the operation of
your printer.
When choosing a place for this product
o
Place this product on a flat, stable
surface that extends around the
product. The surface should be at
least 85x130cm.
o
This product will not operate
properly if it is tilted or at an angle.
o
The printer must only be used
indoor
o
Avoid places subject to rapid
changes in temperature and
humidity. Also keep this product
away from direct sunlight, strong
light, or heat sources.
o
Avoid places subject to shocks and
vibrations.
o
Keep this product away from dusty
areas.
o
Place this product near a wall
outlet where the plug can be easily
unplugged.
o
If you use a stand, the stand must
be able to support at least 125Kg
(275lb).
o
Always put the printer into a place
where the lighting is sufficient.
o
Operate the machine in an
environment with a temperature
range of 10-30 degrees Celsius.
The humidity must be between 20-
80% none condensing.
o
The printer is not made for kids,
but only for professionals
When setting up this product
o
Use the type of power source
indicated on this products label.
o
Do not use a damaged or frayed
power cord.
o
Connect all equipment to grounded
outlets. Do not use the same outlet
for any other system such as a
copy machine or an air control unit
that turn on and off.
o
Do not let the power cord be
damaged.
o
If you are using an extension cord
make sure the power ampere rate
does not exceed the cord ampere
rate of the product.
o
Keep electromagnetic devices and
other potential sources with
magnetic fields away from your
product.
o
Caution: Do not unplug the printer
to shut is off. Use the power button
instead. Do not unplug the printer
until the power light is off.
o
Do not block any of the printer
vents or insert anything foreign in
its slots.
When using this product
o
Observe all relevant local, National
and International regulations in
connection with safety and this
machine. This includes electrical,
mechanical and environmental
issues.
o
Follow the advised schedule for
maintenance to guarantee smooth
operation of the equipment.
o
Do not insert object through the
slots. Take care not to spill liquid
on this product.
o
Always make sure that the print
head has a sufficient distance from
material you print on. A direct
contact between the print head and
the printing media may destroy the
print head.
o
Whenever performing maintenance
or service make sure to switch off
the machine and to disconnect the
power cord.
o
Always keep ink cartridges out of
the reach of children
