POLYPRINT SA – TEXJET OPERATION MANUAL V6.4 EN
- 27 -
Maintenance in absence for long time
We recommend removing the inks from the printer. That means that you will
lose some quantity of ink in the waste tank.
1. Clean all the ink cartridges and place distilled water mixed with the inks
cleaner.
2. By pulling with a syringe on the tubes, clean all of them until they are
transparent. At least 150ml of liquid has to run trough the white tubes to get
them transparent.
3. Perform 2 powerful cleanings until dampers and Printhead are clean too.
4. Switch of the printer and remove the power gable and the data cable.
5. Remove the cartridges and place them in a plastic bag.
6. Empty the Maintenance Tank and put it back empty to the printer.
7. Make a daily and weekly maintenance on the printer.
Caution: Don’t forget to clean with a swab (cleaning tips) and inks
cleaner the cap, wiper and spray pad. Place the inks cleaner in the
cap station of the printer, afterwards the end of your work, in order
to keep the Printhead wet
