Polyprint GJET, Operation Manual, Page: 6 / 71

POLYPRINT SA – TEXJET OPERATION MANUAL V4 EN
- 6 -
o
Whenever performing maintenance
or service make sure to switch off
the machine and to disconnect the
power cord.
o
Always keep ink cartridges out of
the reach of children
o
When handling inks make sure to
wear gloves and protective
goggles.
o
Avoid skin and eye contact with
inks. If ink does get on your skin
wash it thoroughly with soap and
water. If it gets on your eyes flush
them out immediately with water.
o
Store the ink and ink cartridges in
a cool dark place.
o
Wear safety glasses, coverall
chemical splash goggles and face
shield when splashing or spraying
the pre-treatment on the material
o
If you store the cartridge in a cold
environment and are ready to use
them, set them at room
temperature before you use them.
o
Do not dismantle the ink
cartridges. This could damage the
printhead.
o
Do not touch the IC chip on the
cartridges. Do not spill liquid on it.
This will effect the normal printing
operations.
o
If you remove the ink cartridges,
make sure to place them in a bag
individually to keep them away
from dust, dirt and debris.
o
Do not attempt to service this
product your self.
o
Do not modify the machine without
prior consent of POLYPRINT SA.
o
Contact your local dealer in case
you need help.
o
The printer should not be disposed
into the normal household waste
stream.
o
Do not discard the inks into any
sewers, into any body of water, or
on the ground.
We decline all responsibility of damages resulting by inadequate, neglectful or
improper installation of the equipment as well as by improper utilization or non-
compliance with the operational instructions.
We repute that by the time of issuing the present instructions manual, the contents
are correct.
We reserve the right to modify without any notice, the specifications and
performances of the product and the present manual.