manualshive.com logo in svg

Polyprint GJET, Operation Manual, Page: 2 / 71

Share
Download
Polyprint GJET Operation Manual Download Page 2

POLYPRINT SA – TEXJET OPERATION MANUAL V4 EN 

  - 2 -

 

 

 

 

 

 

No part of this publication may be reproduced mechanically or electronically or in any form without the 

prior written permission of Polyprint S.A. The information in this manual is for informational use only, 
is subject to change without notice and should not be construed as a commitment by Polyprint S.A. 

Polyprint S.A. assumes no responsibility or liability for any errors or inaccuracies that may appear in 

this document. Polyprint is a trademark or trade name of Polyprint S.A., Thessaloniki, Greece.  
 

Federal copyright laws permit you to make a backup of software included with TexJet for archival 

purposes only. Any other duplication of this software, including copies offered through sale, loan, 

rental or gift is a violation of law, and subject to both criminal and civil penalties.

 

 

POLYPRINT SA 

Digital Textile Printing Solutions 
Agiou Dimitriou 190, 54638 
Thessaloniki, Greece 

Tel. +30 2310 246418 
Fax +30 2310 246419 

E-mail : [email protected] 

www.polyprint.gr

 

 
Technical Support 

Tel. +30 2310 246418 

[email protected]

 

[email protected]

 

Operation manual version 4 English 

Summary of Contents for GJET








































































Reviews:

No comments