1. Battery Access
& User Controls
1.1 Keyboard
1.2 Display & LED
1
Current day of the week: 1 = Monday
2
Operating menu (active mode is framed)
3
Program number or parameter
4
Installer menu
5
Type of sensor used and temperature displayed
6
Heating demand indication
7
Low batteries indicator
8
°C or °F indicator
9
Setting or measured temperature
10
Temporary override activated, or “ITCS” function if blinking
11
Time
12
Program of the current day (the current time bare/blink)
13
Pictogram for programming
14
Key lock indicator
2. First Time Installation
This section will guide you to starting your thermostat for the
first time.
2.1 Installing Batteries
-
Open the two side covers and insert the 2 x AAA alkaline
batteries supplied (or remove the small protection sticker if the
batteries are already installed in the compartment).
- Close the two side covers
- Your thermostat will ask you to set the time
-
Note:
The time and date setting can be set at any time by
pressing the
(
•
)
program key
Navigation key left
(
)
Navigation key right
(
)
Escape key
(
)
Program key
(
•
)
Minus
key
(-)
Plus
key
(+)
Validation
key
(OK)
Status
LED
Red on: Heating demand
Green flash: Attention
Red flash: Error (batteries, sensor...)
04
