background image

PH03 Comfort Inn - September 2008

Page 1 of 12

PH03 Comfort Inn™

  Assembly Instructions

  USA PATENTS:  4,577,351, 4,637,299, 4,793,100, 4,831,671, 4,895,400, 4,918,765

Des. 304,082  CANADIAN PATENT:  1311898 

®

P

OLY

J

OHN

®

POLYJOHN

USA

PolyJohn Enterprises Corp

2500 Gaspar Ave.

Whiting, IN  46394

Phone:  800-292-1305 

Fax:  219-659-0625

www.polyjohn.com
[email protected]

POLYJOHN

WORLDWIDE

PolyJohn (UK) Ltd.

Equinox 1 Audby Lane

Wetherby, England LS22 7RD

Phone:  44 (0) 1937-583333

Fax:  44 (0) 1937-583322

[email protected]

POLYJOHN

CANADA

PolyJohn Canada

P.O. Box 2300

199 Forest Plain Rd.

Orillia, Ontario LV3 6S2

Phone:  800-465-9590

Fax:  705-325-8250

[email protected]

SPECIFICATIONS

DIMENSION                     IMPERIAL        METRIC

Exterior Height                      91 in                  231 cm
Exterior Width                        62 in                  157 cm
Exterior Length                      62 in                  157 cm
Door Frame Height(I.D.)      74 in                  188 cm
Door Frame Width(I.D.)        32 in                    81 cm
Tank Seat Height                   19 in                    48 cm
Weight                                      240 lb                108 kg
Static Tank Capacity             33 gal                 125 L 
Recirc Tank Capacity 

 22 gal                83.6 L

Side Panel Decal Area          12” x 23”           30cm x 58cm
Door Panel Decal Area         27” x 27”           68cm x 68cm

We recommend reading through the entire Assembly Instructions prior to 
proceeding with installation, service or maintenance.  All references to left 
and right throughout this guide are as viewed from the front.

Summary of Contents for Comfort Inn PH03













Reviews: