OWNER’S MANUAL
7
Filter Pump Model
Sfs350 Filter System
Sfs400 Filter System
Wattage
20 Watts
25 Watts
Amperage
0.35 Amps
0.4 Amps
1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your Type SFS series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY (not included) on hand for lubricating the gaskets.
FILTER PUMP POWER INFORMATION
PARTS LIST
PRELIMINARY STEPS
FILTER PUMP IMPORTANT NOTES
Qty.
Parts Name
Pump Motor Assembly
Pump Mounting Screws
Filter Pump Skimmer Canister
Filter Cartridge
SFS Skimmer Strainer Basket
Skimmer Lock Top
O-ring for Hose Connections
Return Hose
Hose Clamp
Pool Wall Fitting
Fitting Gasket
Return Fitting Washer (RF Washer)
Return Fitting Lock Nut
90° Elbow
1
4
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
10
1
1
1
1
2
1
1
Qty.
Parts Name
Return Fitting Diverter
Locking Ring
Faceplate Gasket
(One Spare Included)
Faceplate
Hex Head Screws
Weir Foam
Weir
Drain Cap
Drain Cap Seal Gasket
Service Plug
Pool Wall (image reference only)
GFCI Power Cord Set (image reference only)
Items
1-5
Items
22
23
24
25
26
27
28
29
30
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1. Installer shall follow written instructions provided for operation of the circulation systems.
2. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) “Swimming Pools, Fountains and Similar Installations”
or its latest approved edition.
3. The Type D Filter Cartridge
8
will hold as many as 2 of the 1” diameter chlorine tablets. Check your chlorine levels to determine the proper number of chlorine
tablets to add. The filter cartridge will automatically dispense chlorine into the pool as the pump runs. You must have the type of Filter Cartridge
8
with a central
core mesh divider (See page 8) to use the chlorine dispenser. DO NOT use this to dispense powdered chlorine, shock treatment or any other type of chemicals as
damage to the pump, filter cartridge, and pool will occur.
4. The SFS Series Filter Pump systems are manufactured by Polygroup
®
and ETL control number 4000608 and 4006317 - double insulated and grounded - 120
Volts A.C. - 60 Hz. (ALL Units must have a minimum of 105 Volts A.C. to start and run properly.)
