9
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
SETUP INSTRUCTIONS
WARNING:
CLIMBING HAZZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL.
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
1. Set up the pool by following all the instructions that came with the pool. Do not
fill with water until the Filter Pump is properly installed. Locate the
Outlet and Inlet openings on the pool wall.
Inlet
Outlet
2. Lubricate the SF Gasket
with petroleum jelly (not included)
3. Lubricate the RF Gasket with petroleum jelly (not included)
4. Remove the Filter Pump Canister , Hoses - , and
Hose Clamps from the package.
and install the Suction Fitting on the Outlet opening of the pool.
DO NOT over tighten the SF Nut or wrinkle to pool liner around the SF
Gasket or the SF Washer.
and install the Return Fitting on the Inlet opening of the
pool. DO NOT over tighten the RF Nut or wrinkle to pool liner
around the RF Gasket.
Outside Pool Wall
Inside Pool Wall
Outside Pool Wall
Inside Pool Wall
