Appendix B: Remote Configuration Parameters Definition
PN: 1725-36038-001_N.docx
137
Parameter
Allowable Values
Description
Notes
PROXYn _
MAIL_SUBSCR
[email protected]
xx
or
Contact to whom the
handset should subscribe
for mail notification. See
sample .cfg file for more
information.
n = 1, 2, 3
name = mail server
contact name.
xxx.xxx.xxx.xxx = IP4
address.
sip:name@domain
Domain where the mail
resides.
This command is only
necessary if the proxy
server does not
automatically create and
renew subscriptions when
the handset registers.
PROXYn_
MAIL_ACCESS
[email protected]
xx
or
Contact to whom the
handset should invite to
access the mail center.
This is the main voicemail
dial number.
n = 1, 2, 3
name = mail server
contact name.
xxx.xxx.xxx.xxx = IP
address
sip:name@domain
Domain where the mail
resides.
PROXYn_
REREG_SECS
35 seconds to
3600 seconds
The requested expiration
interval in REGISTER
request messages.
n = 1, 2, 3
If the server has a lower
maximum setting or a
higher minimum setting
than that requested, the
server response takes
precedence.
See example file
PROXYn_FAILOVER
IP_ADDRESS
xxx.xxx.xxx.xxx:pppp
or
proxyname:pppp
The IP address of the
Interactive Intelligence
failover call server.
n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional,
5060 is the default)
proxyname = computer
name (DHCP only)
AUTH
[see warning note
below]
username;password
Credentials.
In general credentials are
needed for each registered
line.
username = The dial
number or string that
identifies the line
appearance. Generally an
extension or phone
number.
password = a secure
password created by the
system administer which
enables a handset to
register and/or function.
