Polycom ReadiVoice Reference Manual Download Page 278

Page: 278 / 326

ReadiVoice PSPI Reference

270

Proprietary & Confidential

GetGrpAccessClass

Stored procedure for retrieving a list of access classes associated with a

subscriber group. A return code of 100 flags the end of the subscriber group’s

access classes. Compatible with v. 1.30.0 or later of the software.

Parameters

Specify all parameters. The constraints column shows specific value or range

constraints. For syntax rules and constraints applicable to all parameters, see

“Calling Stored Procedures”

on page 4.

SMALLINT

Conference continuation option changeable for
current conference. 0: No; 1: Yes.

SMALLINT

Account status. 0: Inactive; 1: Active;
2: Deleted.

SMALLINT

Quick start enabled. 0: No; 1: Yes.

SMALLINT

Roll call changeable by subscriber.
0: No; 1: Yes.

SMALLINT

Quick start changeable by subscriber.
0: No; 1: Yes.

SMALLINT

Autocontinuation option changeable by
subscriber. 0: No; 1: Yes.

SMALLINT

Name record option. 0: Disabled; 1: Enabled.

SMALLINT

Conference starts with continuation enabled.
0: No; 1: Yes.

SMALLINT

Name record changeable by subscriber.
0: No; 1: Yes.

SMALLINT

Conference recording available. 0: No; 1: Yes.

INT

Application provider ID.

Data Type

Description

Parameter

Data Type

Constraints

Description

LocalGroupId

INT >0

ID of subscriber group. Must be in database.

Summary of Contents for ReadiVoice







































































































































































































































































































































Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands

Polycom ReadiVoice, Reference Manual

Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands