Polycom ReadiVoice Reference Manual Download Page 126

Page: 126 / 326

ReadiVoice PSPI Reference

118

Proprietary & Confidential

Parameters

None

Return Values

Data Type

Description

INT

Return code (0: OK; otherwise, error code).

SMALLINT

Subscriber entry time-out.

SMALLINT

Subscriber exit time-out.

SMALLINT

Minimum code length (for access code and for
subscriber and participant passwords/codes).

SMALLINT

Maximum number of participants.

SMALLINT

Confidence factor.

SMALLINT

Port utilization factor.

SMALLINT

Routed system. 0: Non routed shared;
1: Routed; 2: Non routed private.

SMALLINT

Use hidden numbers. 0: No; 1: Yes.

SMALLINT

Validate on access code only. 0: No; 1: Yes.

CHAR(20)

System type. “RVIP”: ReadiVoice-IP;
“RV_PSTN”: ReadiVoice-TSP.

CHAR(128)

SIP domain name, if ReadiVoice-IP system.
Otherwise, empty string.

SMALLINT

Translation number type. 0: Random; 1: Fixed;
2: Fixed with 3-digit code.

SMALLINT

Traditional shared call flow. 0: Unavailable;
1: Available.

SMALLINT

Traditional private call flow. 0: Unavailable;
1: Available.

SMALLINT

Two-password shared call flow. 0: Unavailable;
1: Available.

SMALLINT

Two-password private call flow. 0: Unavailable;
1: Available.

SMALLINT

Conference termination participant count.

Summary of Contents for ReadiVoice







































































































































































































































































































































Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands

Polycom ReadiVoice, Reference Manual

Search results

Summary of Contents for ReadiVoice

Reviews:

Related manuals for ReadiVoice

Brands by name

Popular brands