Release Notes
Polycom® QDX 6000™, Version 4.0.1.1
5
3
Go to
System > Admin Settings > General Settings > Security > Security
Settings >
>
.
4
Enable
Allow Video Display on Web
.
Setting
Description
Allow Video Display on Web Specifies whether to allow viewing of the room where the
system is located, or video of calls in which the system
participates, using the Polycom QDX 6000 web interface.
Note:
This feaure activates both near site and far site video
display in Web Director.
To stream a conference:
1
Go to
System > Admin Settings > Network > IP > Multicast
, select the
Enable Multicast
option.
2
In the browser address line, enter the system’s IP address, for example, http:
// 10.11.12.13, to go to the system’s web interface. Go to
Admin Settings >
General Settings > Security
, set the Remote Access password and the
Meeting password.
3
Place the video call to other participants.
•
You can start streaming only when Polycom QDX 6000 is in a call.
•
Make sure the
Allow Video Display on Web
option is enabled (
System > Admin
Settings > General Settings > Security > Security Settings >
>
).
To stop streaming a conference:
1
Go to
System > Admin Settings > Network > IP > Multicast
.
2
Clear the
Enable Multicast
selection.
To view a streamed conference:
1
On a computer running Windows XP or Windows Vista operating system,
open an Internet Explorer 6.x, 7.x, or 8.x.
