Polycom QDX 6000 System, Release Notes

Page: 8 / 16

Release Notes
Polycom® QDX 6000™, Version 4.0.1.1
8
Corrected Issues in 4.0.1
The following table lists corrected issues in version 4.0.1.
Category Issue ID Descriptions
Content BROAD-892
H.264 content couldn't be negotiated in
H323 calls above 1920kbps. This issue
has been corrected.
Interoperability
Polycom® VSX
BROAD-871
QDX is not negotiating stereo audio with
VSX. This issue has been corrected.
Data Pass Through BROAD-1184
Data pass through may output garbage
data at system start up time.
This issue is corrected with the help of a
special cable. Please use the Polycom
data pass through cable to eliminate
garbage data at system start up.
You may use a normal serial cable for
extension, but the Polycom cable must
be connected to the QDX serial control
port.
Note: The part number of the Polycom
serial cable is 2457-32892-001. It is
easily recognizable by the “DATA” label
on one end of the cable.
Interoperability
Radvision IP/ISDN
Gateway
QDX-271
QDX 6000 cannot dial into a Radvision
IP/ISDN gateway traversing NAT. This
issue has been corrected.
Known limitations
The following table lists the known limitations for the version 4.0.1.1 release. If a
workaround is available, it is noted in the table.
Category Issue ID Found in
Release
Descriptions Workaround
Audio 4.0.1 Hot-plug the EagleEye View Camera’s Use remote control to correct the