Release Notes
Polycom® QDX 6000™, Version 4.0.1.1
9
Category
Issue ID
Found in
Release
Descriptions
Workaround
microphone might change the system’s
mute status.
mute status.
Interoperability
Polycom RMX 2000
Version 7.x
BROAD-2523
4.0.1
When QDX 6000 is in a call with RMX
2000 running 7.1.0.121 or later version,
the received video resolution and frame
rate on QDX 6000 may be lower than that
RMX transmits.
Disable H.264 on QDX 6000.
Interoperability
Polycom VSX
In SIP calls to the Polycom VSX system,
QDX 6000 does not negotiate transmitting
stereo audio.
Use call rates lower than 384 kbps
(including 384 kbps), or higher than
768 kbps.
Interoperability
Sony PCS-XG80
Sony PCS-XG80 is unable to send H.239
content to QDX 6000 when connecting to
high resolution content source.
Reduce the resolution of Sony
content to 1280x720 or lower.
Interoperability
Sony PCS-XG80
Occasionally, QDX 6000 crashes when the
Sony PCS-XG80 sends content when
connecting to high resolution content
source.
Reduce the resolution of Sony
content to 1280x720 or lower.
Interoperability
Tandberg MXP
Call rates higher than 1920 kbps will
down-speed to 1920 kbps when QDX
6000 makes a SIP call with Tandberg
MXP.
None
Interoperability
FX
Content does not work in calls
between Polycom QDX 6000 and FX.
None
Interoperability
Tandberg MXP
Encryption check codes on Tandberg MXP
and QDX 6000 do not match.
None
Hardware
The RS-232 Flow Control is not supported
when the RS-232 mode is set to Pass
Thru.
None
Multicast
System pop up an error dialog "cannot
create overlay" while reopening the
multicast page.
Close the web browser and reopen.
TV UI
When 802.1x is enabled on the system,
the EAP authentication status does not
update if the LAN cable is disconnected.
None
Camera
Occasionally, the EagleEye camera as the
2
nd
camera shows blue screen.
Manually detect the EagleEye
camera.
Camera
Sometimes the 2nd PTZ camera cannot
be detected automatically.
Manually detect the EagleEye
camera.
Interoperability
Polycom RMX 2000
In SIP calls with Polycom RMX2000,
Polycom QDX 6000 receives H.263 4CIF
video instead of H.264 1024x576 video at
call rate of 768 kbps.
1. Let QDX dial into RMX2000;
2. Use call rate other than 768 kbps.
Interoperability
Tandberg MXP
In HD calls with Tandberg MXP, the lip
sync of Polycom QDX 6000 is slightly off.
None