2.
Set ports 1719 and 1720 to port forward to the ViaVideo Desktop on the home
router.
Note: ViaVideo may register to PathNavigator as soon as the device has started and
before a new VPN address can be discovered. In this case, the ViaVideo will have to
wait until the first registration expires (or go offline) before it can re-register with the
new VPN IP.
Registering ViaVideo
1.
Go to Setup.
2.
Click on the H323 tab.
3.
On the Gatekeeper area, select Off and then select Specify.
After you have completed all of the above steps, ViaVideo can create remote calls through
the VPN.
Copyright (c) 2004 Polycom Incorporated. All rights reserved.
Polycom, the Polycom logo design and ViewStation are registered trademarks, PathNavigator, Global Management System, and
iPower are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of
respective owners
6
