Polycom KIRK 8000 Configuration Manual Download Page 51

Page: 51 / 88

Polycom KIRK Wireless Server 8000 Configuration Guide

Tracing

Polycom, Inc.

You have the following options.

To further limit the amount of information that is displayed, you can set a trace

filter.

To Specify a Trace Filter

From the

Debug

menu, click

Trace

filters.

Figure 8-2

Specifying Trace Filters

Table 8-1

Trace Levels

Trace level

Description

Disabled

Displays no trace messages.

Level 1

Displays subscription and location
registration information.

Level 2

Displays subscription, location
registration, abnormal calls, and
messaging information.

Level 3

Displays subscription, location
registration, abnormal calls, messaging,
and normal voice information.

Level 4

Note

level 4 is intended for Polycom KIRK

internal use only. We recommend that you
don’t use level 4 unless otherwise
instructed by Polycom.

Displays subscription, location
registration, abnormal calls, messaging,
and normal voice information as well as
debug messages.

Summary of Contents for KIRK 8000

























































































Search results

Summary of Contents for KIRK 8000

Reviews:

Related manuals for KIRK 8000

Brands by name

Popular brands

Polycom KIRK 8000, Configuration Manual

Search results

Summary of Contents for KIRK 8000

Reviews:

Related manuals for KIRK 8000

Brands by name

Popular brands