Polycom, Inc.
43
MSF Messages (Message Service Function)
System Management
Figure 7-7
MSF Broadcast Tab
2
From the
BroadcastType
list, select the type of broadcast from the
broadcast list. You have the following options.
3
In the
Repetitions
field specify how many times you want the message to
repeat.
4
If you have specified
Single PP
, then in the
PP receiver ID
type the direct
number of the PP you want to broadcast to.
- or -
5
If you have specified
Group
, then in the
PP receiver ID
type the group
number you want to send the message to.
The PP Receiver ID is disabled if you select all PP.
6
In the
Discriminator
field, specify how the handset message alert.
7
In the
Text
field, type the text you want to broadcast, and then click
Broadcast Request
.
Responding to Text Messages
On the MSF Demo tab, the Connection Status area shows if a text message has
been sent from a handset to the KWS8000.
1
To respond to the message and set up a connection, type the handset
number in the
Direct Number
field. The number is displayed in the
Connection Status area. Click
Connection Response
.
2
To release the connection to the handset, type the direct number in the
Direct Number
field, and then click
Release Request
.
Table 7-4
MSF Broadcast Types
Type
Description
All PP
Sends message to all registered PPs.
Single PP
Sends message to one specific PP.
Group
Sends message to a group of handsets
