TOOL SIZE
Length:
250 mm – 9.8”
Width:
130 mm – 5.1”
Height:
120mm – 4.7”
Weight:
2.6 kgs – 5.7 lbs
REQUIRED AIR
Pressure range:
4.5-7 bar / 64-99 psi
PERFORMANCE
Sealing:
Friction seal
Joint strength:
80% plastic strap
strength*
•
depends on strap quality
CHART OF TYPES
ITEM
MODEL
STRAP
THICKNESS
T189901
T182501
PWT
PP-PET 16-19mm / 5/8”- 3/4”
PET 25mm – 1”
>0.016” –
0.055”<
Polychem Corporation warrants all its tools and battery chargers during a period of 6 months from the
shipping date document. Wear parts are warranted for 45 days, otherwise wear parts are excluded from
regular warranty, wear parts are shown on spare parts list (in tool manual).
Warranty includes free replacement parts. The warranty is not valid in case of improper use, lack of
maintenance, tampering, arbitrary modifications and reparations, use of non-original parts, disregard of
instructions of the operation manual, or missing serial number. No compensation can be claimed for
production shutdowns and for damages to people and objects due to tool defects. Polychem Corporation
reserves the right to modify the tools and documentation without any obligation to update previous ones.
Polychem warrants all its batteries during a period of 120 days from the shipping date document. The
manufacturer is committed to replace it with a free battery only when there are manufacturing defects that
make it unfit for use.
It is recommended to always use a dryer unit near the compressor and a filter-regulator-lubricator
unit with pressure gauge (Polychem part # 200-0025) close to the tool air connection to avoid water
and dirt in the valves or in the pneumatic motors. Connect the tool to air with quick connector ¼” and
use minimum 8mm or 3/8” internal diameter pipe; max length for flexible pipe 10 m between tool and
regulator group. Check that your compressor / air distribution plant is able to supply the right air
quantity as shown in the operation manual without losing pressure.
TOOL AIR CONNECTION
200-0025
3) WARRANTY
4) INSTALLATION