Polyaire ZoneMaser ZoneTouch V2, User Manual

Page: 9 / 20

ZONEMASTER ZONETOUCH V2 ZONE CONTROL SYSTEM - User Manual
7
Figure 7.
4.2 Select Program for a Group
Enter the ‘Assignment’ screen (Figure
7) by touching on
programming screen (Figure 4).
Assignment screen shows the list of
the current program of each group.
Touching button will go back to
the home screen from Assignment
page.
Figure 8.
Figure 9.
Figure 10.
Touch the program field of a group to
show all program options (Figure 8).
Touching a program option will assign
the program to the group (Figure 9).
Each group can be assigned with one
program from program1 to program4
(‘P1’ to ‘P4’), and the group will not
have a program if ‘No’ is selected. If a
program has been assigned to a group,
the program indicator will appear on
the group (Figure 10) if any of the four
events in the program is enabled.
NOTE: Programs cannot be
assigned to a group with turbo
status. Record programs and groups
to ‘Table 5: Programs’ on Page 13